Samsung Washing Machine Error Code DS
Last updated: January 14, 2026 MEDIUM
⚠️ Safety Warning
- Unplug the appliance before attempting any repairs
- Never attempt repairs while the appliance is energized
- If you're unsure, contact a certified Samsung technician
- Keep children and pets away during troubleshooting
🔧 Tools You May Need
- Multimeter
- Screwdriver set
- Work gloves
- Adjustable pliers
- Bucket
- Towels
- Flashlight
What Does Error Code DS Mean?
If your Samsung washing machine shows DS, the appliance has detected temperature sensor malfunction. Most homeowners can troubleshoot this by inspecting visible parts.
How to Fix Error Code DS
Step 1: Reset Your Washing Machine
- Unplug the washing machine from the power outlet
- Wait 2-3 minutes for the capacitors to discharge
- Plug the appliance back in
- Check if the error code has cleared
Step 2: Specific Troubleshooting
If the washer won't start, the ds code might appear, signaling that the washer door is open and the lock is malfunctioning. Use the diagnostic test mode to check the door lock/switch assembly. If that shows the lock is defective, replace it.
Diagnostic Checks for Washing Machine Error DS
| Diagnostic Check | Expected Result | If Failed |
|---|---|---|
| Check water supply valves (hot & cold) | Both valves fully open, good water pressure | Open valves, check for kinks in hoses |
| Inspect drain hose for clogs | Clear path, hose not kinked or clogged | Clear blockage, straighten hose |
| Test door/lid switch with multimeter | Continuity when closed, no continuity when open | Replace door/lid switch assembly |
| Check load balance | Load evenly distributed in drum | Redistribute clothes, run spin cycle |
| Verify drain pump operation | Pump runs, water drains within 2 minutes | Clean pump filter, check for obstructions |
💡 Pro Tips from ErrorCodeHub
Load Size Rule: Never fill the drum more than 3/4 full. Overloading is the #1 cause of unbalance errors and premature bearing failure.
Frequently Asked Questions
What does Samsung error code DS mean?
If your Samsung washing machine shows DS, the appliance has detected temperature sensor malfunction. Most homeowners can troubleshoot this by inspecting visible parts.
Can I fix error code DS myself?
Many DS errors can be fixed with basic troubleshooting. Start with a reset, then check common causes.
How much does it cost to fix error DS?
Repair costs typically range from $50-$300 depending on the cause.
Should I call a technician for error DS?
If basic troubleshooting doesn't work, or you're uncomfortable with repairs, contact a certified technician.
More Samsung Washing Machine Error Codes
When to Call a Professional
Consider contacting a certified Samsung technician if:
- The error persists after troubleshooting
- You're not comfortable with DIY repairs
- The repair involves electrical or gas components
- Your appliance is still under warranty
Find a technician: Call Samsung support or search for certified repair services in your area.